|
|
|
|
THE PRODUCT
The micro series Vehicle Reversing Aid is an automatic back up alert system that warns drivers of potential obstacles while backing up their vehicle. There are two micro series models - micro2S and micro3LV.
MINIATURE ACOUSTIC TRANSMITTER/RECEIVER
The micro series Reversing Aid’s miniature acoustic sensors transmit a uniquely modified "narrow beam" signal. This narrow beam signal is capable of seeing through fog, rain, smog and snow, any weather, day or night, on any road condition. When this signal strikes a solid target "directly" in the path of the host vehicle, it bounces back to the antenna/receiver and is instantly sent to the signal microprocessor. The acoustic sensors have a detection range of up to 8 feet. The design of sensors coupled with color matching decorative sensor lens ensures ‘out-of-sight’ installation of the sensors on your vehicle.
micro3LV detector
The 8-bit microprocessor programmed with ‘Intelligent Control Software’ incorporating ‘fuzzy logic’ processes the target signal to calculate distance or range, as well as the closing speed between the host vehicle and the obstacles in the path of the host vehicle. The processor automatically and continuously computes this information. If the processor determines that the existing conditions require the driver to take any precautionary or corrective action, special emergency sounds are generated.
The
micro series speaker can be mounted anywhere
inside the passenger compartment of your vehicle. The system is activated when the driver
puts their vehicle into reverse. The system alerts the driver with a variable
multi-tone audio pulse. The audio pulse intensity increase and the audio tone
changes as the vehicle back closer to an obstacle. In
addition to the variable multi-tone audio pulse, the system alerts the driver with our
advance VDI (voice distance indicator) module. The VDI module verbally tells the
driver the vehicle-to obstacle distance in feet and inches.
micro 3LV Detection Zones
The micro series Reversing Aid is designed for easy installation. An experienced installer will be able to install the system into any vehicle in about 90 minutes. No drilling is required. Most of the necessary parts and components for the installation are included in the system package.
| Step 1: Install sensors on back of vehicle. e.g.: Install on trunk lid. | Step 2: Wire system to reverse lamp wire and mount power unit in trunk.. e.g. Install on inside trunk lid. | Step 3: Install speaker in passenger compartment. e.g.: by the radio speakers. |
|
|
|
Additional tools an installer will need are a pair of pliers and the proper screw driver to get access to the reverse lamp power and ground.
A comprehensive installation guide along with pictures showing the installation process is included in every micro3 Vehicle Reversing Aid package. Click Here to go to our installation manual.
CALL us at: 1-800-869-8866 or FAX us at: 1-310-323-1071
WRITE us at: Poron USA Inc. - 16001 S.
Vermont Ave., #59, Gardena, CA 90247-4566
Home | Warranty & Return Policy | Technical Specifications | Dealer Opportunity | Installation Manual | Vehicle Repair Cost
Page last updated on October 02, 2006
